Wheelbase Adapter Bracket with Adjustable Tilt

Description

Rigid wheelbase adapter bracket, designed for mounting to aluminium profile rigs. Features tilt adjustment between 0° and 8°. Comes with 6 black socket head M6 screws, 4 black M6 nuts and 4 hexagon head screws for assembly and connection to your rig into T-nuts (which are not included). Designed and made in Germany.

Made from aluminium, finished with a wear resistant, smooth RAL 9005 powder coat. Easily adjust wheel tilt by loosening the front side screws while holding up the wheelbase, and retightening them in the desired position. The flanges easily resist the weight and moment of the highest-end wheelbases, as they allow the whole length of the sides to resist the load, and not just the thickness of the material. The bracket doesn’t give way at all, even at ridiculous force-feedback settings.

Compatible with:

• Moza R3, R5, R9, R12, R16, R21, R21 Ultra, R25 Ultra
• Simagic Alpha, Alpha Mini, Alpha Ultimate, Alpha Evo, Alpha Evo Ultra
• Conspit Ares, Ares Apex, Ares Platinum
• VRS DFP15
• Fanatec CSL DD, CSL Elite
• Simucube 3 Sport, Pro and Ultimate
• and many others!

Does not fit Asetek wheelbases or the Thrustmaster T818. If you’re unsure whether your wheelbase will fit, take a look at the drawing measurements below, or contact us anytime.

Sheet metal parts can show tooling marks in, or around, holes and bends, as well as other manufacturing-related surface imperfections.

FAQ

How do I mount the wheelbase to the bracket, and the bracket to aluminium profiles, on my DIY rig?

We recommend connecting our Wheelbase Adapter Bracket to an 80×40 aluminium extrusion. It’s also possible to connect it to two separate extrusions, or to a single extrusion only. You need a size 4 hex (“allen”) key, and a size 10 socket wrench.

1. Use 4 black socket head screws and nuts to connect the two parts of the bracket to each other as shown above. Choose your desired wheel tilt angle. Secure tightly by countering the nut with your socket wrench while screwing in with your hex key.
2. Lay the bracket and your wheelbase on the side so the holes of the top plate (the one with 7 holes on the flat side) align with the mounting holes of your wheelbase. Use the remaining 4 black socket head screws and screw the inside of the top plate into the wheelbase. The easiest way to do this is to stick the long side of your hex key through the aligning holes of the bottom plate, into the screws.
3. Side 2 or 4 M6 T-nuts (that fit your size of aluminium profile) into 1 or 2 extrusions of your rig. Place the bracket with the connected wheelbase on them. Use your socket wrench to connect 2 or 4 hexagon head screws through the bottom plate (the one with 10 holes on the flat side) into the T-nuts.

Is there a warranty?

Yes, our limited warranty of 3 years applies as per our Terms & Conditions.